Milwaukee MW102 PRO+ 2-in-1 pH and Temperature Meter with ATC for Brewers

Wine pH Meter Kit. Lab Grade. High Performance. Tough.

The Milwaukee MW102 PRO+ Wine pH Meter Kit has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The MW102 Wine pH Meter Kit combines the power of the MW102 meter with the special capabilities of the MA919B/1 Direct Wine Measurement pH Probe specifically designed for wine.

The Milwaukee PRO pH meter offers:

Accuracy: People choose the PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a Wine specific pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature. The temperature probe can also be used as a very accurate thermometer.

Toughness: The rugged meter is built to take knocks.

Specialized design for pH analysis in Wine : MA919B/1 Wine probe features include a Large PTFE Reference that helps prevent wine junction stains and clogging, sliding reference that allows the user to easily purge tainted internal electrolyte, is glass with a high impedance for faster response time and is easily refillable with a screw hole on its cap.

The PRO MW102 Wine Kit also arrives complete with 7.01, 4.01 pH calibration solutions, the MA9016 Cleaning Solution, the MA9015 Storage Solution and MA9011 electrolyte refilling solution all designed to keep your electrode in top performing condition!

The PTFE large reference juntion, unlike standard electrodes, helps reduce wine stains and clogging which increases performance and accuracy for the user.

Design features
Fast easy to read results with large digital LCD readout
Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)
Lightweight and portable
Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
Simple push button, automatic two-point calibration for increased accuracy
Wine grade electrode with an easy-to-clean, PTFE reference with a screw on cap to ensure proper storage
Rugged stainless temperature probe
MA919B/1 Wine specific pH electrode
Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)
Arrives complete with 4.01 & 7.01 calibration Solutions, MA9016 Cleaning Solution, MA9015 Storage Solution and MA9011 Electrolyte refilling solution.
Care and Use
pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

Sensing bulb
The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

Reference junction
The reference junction the PTFE Sliding material that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

Cleaning and Storage: All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!

Storage :The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Store the pH probe in storage solution MA9015. Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.