Descripción
Description:
Hantek DSO5072P Digital Storage Oscilloscope 70MHz 2Channels 1GSa/s 7inch TFT LCD
Features:
70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40( Kbytes )
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40( Kbytes )
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
VGA Optional
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
VGA Optional
Specification:
| Model | DSO5072P | |
| Acquisition | ||
| Sample Rate | Real-Time Sample: 1GS/s | |
| Inputs | ||
| Inputs Coupling | AC, DC, GND | |
| Inputs Impendance | 1MΩ±2% //20pF±3pF | |
| Horizontal System | ||
| Sample Rate Range | 500MS/s--1GS/s | |
| Waveform Interpolation | (sin x)/x | |
| Record Length | 40( Kbytes ) |
|
| SEC/DIV Range | 4ns/div to 40s/div | |
| Sample Rate and Delay Time Accuracy |
±50ppm(at over any ≥1ms time interval) | |
| Position Range | 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s |
|
|
△ Time Measurement Accuracy (Full Bandwidth) |
Single-shot, Normal mode:± (1 sample interval 100ppm × reading 0.6ns); >16 averages:± (1 sample interval 100ppm × reading 0.4ns); Sample interval = s/div ÷ 200 |
|
| Vertical System | ||
| Vertical Resolution | 8-bit resolution, all channel sampled simultaneously | |
| Position Range | 2mV/div to 10V/div | |
| Bandwidth | 70MHz | |
| Rise Time at BNC( typical) | 5ns | |
| Bandwidth Limit | 20MHz | |
| Low Frequency Response (-3db) | ≤10Hz at BNC | |
| DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div |
|
| Trigger System | ||
| Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative | |
| Trigger Source | CH1, CH2, EXT, EXT/5, AC Line | |
| Trigger Modes | Auto, Normal, Single | |
| Coupling Type | DC, AC, Noise Reject, HF Reject, LF Reject | |
| Trigger Sensitivity (Edge Trigger Type) |
DC(CH1,CH2): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full; DC(EXT): 200mV from DC to 100MHz; 350mV from 100MHz to 200MHz; DC(EXT/5): 1V from DC to 100MHz;1.75V from 100MHz to 200MHz; AC: Attenuates signals below 10Hz; HF Reject: Attenuates signals above 80kHz LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz |
|
| Trigger Level Range | CH1/CH2: ±8 divisions from center of screen; EXT: ±1.2V; EXT/5:±6V |
|
| Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns | CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen; EXT: ± (6% of setting 40mV); EXT/5: ± (6% of setting 200mV); |
|
| Set Level to 50%(typical) | Operates with input signals ≥50Hz | |
| Video Trigger | ||
| Video Trigger Type | CH1, CH2: Peak-to-peak amplitude of 2 divisions; EXT: 400mV; EXT/5: 2V |
|
| Signal Formats and Field Rates, Video Trigger Type | Supports NTSC, PAL and SECAM broadcast systems for any field or any line | |
| Holdoff Range | 100ns ~ 10s | |
| Trigger Frequency Counter | ||
| Readout Resolution | 6 digits | |
| Accuracy (typical) | ±30ppm (including all frequency reference errors and ±1 count errors) | |
| Frequency Range | AC coupled, from 4Hz minimum to rated bandwidth | |
| Display | ||
| Display Type | 7 inch 64K color TFT (diagonal liquid crystal) | |
| Display Resolution | 800 horizontal by 480 vertical pixels | |
| Display Contrast | Adjustable (16 gears) with the progress bar | |
| Probe Compensator Output | ||
| Output Voltage( typical) | About 5Vpp into ≥1MΩ load | |
| Frequency(typical) | 1kHz | |
| Power Supply | ||
| Supply Voltage | 100-120VACRMS(±10%), 45Hz to 440Hz, CAT II 120-240VACRMS(±10%), 45Hz to 66Hz, CATII |
|
| Power Consumption | <30W | |
| Fuse | 2A, T rating, 250V | |
| Environmental | ||
| Temperature | Operating: 32°F to 122°F (0°C to 50°C); Nonoperating: -40°F to 159.8°F (-40°C to 71°C) |
|
| Cooling Method | Convection | |
| Humidity | 104°F or below ( 40°C or below): ≤90% relative humidity; 106°F to 122°F ( 41°C to 50°C): ≤60% relative humidity |
|
| Altitude | Operating: Below 3,000m (10,000 feet); Nonoperaring: Below 15,000m(50,000 feet) |
|
| Mechanical | ||
| Size | Length 385mm, Width 200mm, Height 245mm | |
| Weight | 3.5KG(with Packing); 2.08KG(without Packing) | |
Package includes:
1 x DSO5072P Digital Oscilloscope
1 x Power cord
2 x Probe
1 x USB cable
1 x CD-ROM
Details pictures:
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.