Cart 0
Peak Atlas LCR40 Passive Component Analyzer

Peak Atlas LCR40 Passive Component Analyzer

Peak Electronics

  • $ 12900

The Atlas LCR40 is an advanced instrument that greatly simplifies the testing of passive components. Traditional LCR bridges are inherently complex and very time consuming to use. The Atlas LCR does everything automatically, it tells you the component type in addition to component value data. What's more, the Atlas LCR automatically selects the best signal level and frequency for the particular component under test. Just clip the universal test leads to your component and press the test button. In seconds, the Atlas LCR will identify the type of component (Inductor, Capacitor or Resistor) together with the component’s main value. Additionally, further component data is also displayed, such as the DC resistance of an inductor. The test frequency is automatically selected to suit the component under test and this is also confirmed on the scrollable display. The Atlas LCR is supplied with our new detachable micro-hooks and clip probes, which also allows the use of the optional SMT Tweezers to probe surface mount devices or Gold Coated Croc clips. Supplied fully assembled, tested and aligned This is an indispensable piece of test equipment for a system designer or product technician!

Parameters Minimum Typical Maximum Notes







0.3R 0.6R    


Typically ±1.0% ±1.2R 1,2,6















Typically ±1.5% ±1.0pF 1,2,5
Inductance range 1µH   10H  
resolution 0.4µH 0.8µH    
accuracy  Typically ±1.5% ±1.6µH 1,2,4
Peak test voltage (across O/C) -1.05V   +1.05V  
Peak test current (thru S/C) -5.0mA   +5.0mA  


1kHz -1.5% ±1% +1.5%  
14.925kHz -1.5% ±1% +1.5%  
200kHz -1.5% ±1% +1.5%  
Sine Purity Typically -60dB 3rd harmonic  
Operating temperature range 10°C   40°C 3
  50°F   104°C  
Battery operating Voltage 8.5V   13V




A view inside:
Modern Surface Mount Design
Notes for table above:
1. Within 12 months of factory calibration. Please contact us if you require a full re-calibration and/or certification of traceable calibration.
2. Specified at temperatures between 15°C and 30°C (59°F and 86°F) .
3. Subject to acceptable LCD visibility.
4. For inductances between 100µH and 100mH.
5. For capacitances between 200pF and 500nF.
6. For resistances between 10Ω and 1MΩ.

Typical Accuracy Curves For Capacitance, Inductance and Resistance

Examples of LCR40 screen shots.

For more info see the Datasheet and see our Discussion Forum for advice on operation.
Review of the LCR40:  Video
Peak Atlas User Guide

We Also Recommend